SHZ-D (Ⅲ) circulating water vacuum pump
Features:
A circulating water vacuum pump is a kind of laboratory vacuum generator that makes use of a water jet to generate a vacuum. Provide vacuum situations for evaporation, distillation, crystallization, drying, sublimation, filtration, and pressure discount, and degassing.
Advantages:
- Double faucets, two vacuum meters, alone or in parallel.
- Newly improved anti-corrosion 4 faucets, with 4 vacuum meters, alone or in parallel.
- Motor materials: stainless steel or anti-corrosion materials.
- Corrosion resistance pump, free-pollution, low noise and move simply. Vacuum regulator is out there based on customer wants.
- Accommodate four folks for a chemical check, cut back the fee, and in addition saves house.
- To prevent I from working lengthy hours after high temperature, vacuum degree is decreased, particularly add ice hole to add ice when water temperature too excessive vacuum degree reduced.
- Reasonable design, compact construction, security encapsulation.
- Absorb the harmful fuel, environmentally pleasant, to make sure bodily and mental health.
- Resistance to acid and alkali solvent.
- Special custom-made motor by well-known manufacturers, fluorine rubber mechanical seal to keep no corrosive gasoline into the motor.
- Water circulation to save precious water assets.
FAQ:
- What are the models of the SHZ-D collection circulating water vacuum pump?
SHZ-D(Ⅲ) and SHZ-D(Ⅲ) four faucet. - What should I do if the circulating water vacuum pump motor doesn’t work?
Replace with a brand new fuse, substitute with a new capacitor with the same capacity and voltage as the original, exchange with a brand new motor, substitute with a brand new bearing, clean up debris, right the position of the impeller, weld firmly, and tighten the line card. - What should I do if the circulating water vacuum pump leaks?
Replace the water tank or sealing ring, and tighten the water nozzle. - What are the precise operation methods of circulating water vacuum pumps?
Add water, repeat the machine to cease including water, and alter the water no much less than as quickly as a week. Connect the equipment that must be vacuumed to the exhaust nozzle, turn off the cycle switch, activate the ability, and activate the facility change to start the vacuum operation. Connect the drain hose to the water supply (tap water), and the overflow nozzle as a drain outlet. Properly control the amount of faucet water to keep the water temperature within the water tank from rising and stabilize the vacuum.
Model
SHZ-C
SHZ-C
SHZ-95B
Power(W)
370
370
370
Voltage(V/Hz)
220/50
220/50
220/50
Flow(L/min)
80
80
80
Body Material
1cr18
polypropylene
Anti-corrosive
Lift(m)
12
12
12
Max. Vacuum(Mpa)
0.098
0.098
0.098
Sucking rate for single tap (L/min)
10
10
10
Quantity of tap(Pcs)
5
3
5
Tank capacity(L)
50
50
50
Dimension(mm)
450*340*870
450*340*870
450*340*840
Weight(kg)
37
37
37
Security performance
check-valve
check-valve
check-valve
