A circulating water vacuum pump is a kind of laboratory vacuum generator that makes use of a water jet to generate a vacuum. Provide vacuum situations for evaporation, distillation, crystallization, drying, sublimation, filtration, and pressure discount, and degassing.

Advantages:

1. Double faucets, two vacuum meters, alone or in parallel.
2. Newly improved anti-corrosion 4 faucets, with 4 vacuum meters, alone or in parallel.
3. Motor materials: stainless steel or anti-corrosion materials.
4. Corrosion resistance pump, free-pollution, low noise and move simply. Vacuum regulator is out there based on customer wants.
5. Accommodate four folks for a chemical check, cut back the fee, and in addition saves house.
6. To prevent I from working lengthy hours after high temperature, vacuum degree is decreased, particularly add ice hole to add ice when water temperature too excessive vacuum degree reduced.
7. Reasonable design, compact construction, security encapsulation.
8. Absorb the harmful fuel, environmentally pleasant, to make sure bodily and mental health.
9. Resistance to acid and alkali solvent.
10. Special custom-made motor by well-known manufacturers, fluorine rubber mechanical seal to keep no corrosive gasoline into the motor.
11. Water circulation to save precious water assets.

FAQ:

1. What are the models of the SHZ-D collection circulating water vacuum pump?
   SHZ-D(Ⅲ) and SHZ-D(Ⅲ) four faucet.
2. What should I do if the circulating water vacuum pump motor doesn’t work?
   Replace with a brand new fuse, substitute with a new capacitor with the same capacity and voltage as the original, exchange with a brand new motor, substitute with a brand new bearing, clean up debris, right the position of the impeller, weld firmly, and tighten the line card.
3. What should I do if the circulating water vacuum pump leaks?
   Replace the water tank or sealing ring, and tighten the water nozzle.
4. What are the precise operation methods of circulating water vacuum pumps?
   Add water, repeat the machine to cease including water, and alter the water no much less than as quickly as a week. Connect the equipment that must be vacuumed to the exhaust nozzle, turn off the cycle switch, activate the ability, and activate the facility change to start the vacuum operation. Connect the drain hose to the water supply (tap water), and the overflow nozzle as a drain outlet. Properly control the amount of faucet water to keep the water temperature within the water tank from rising and stabilize the vacuum.
   

   Model	SHZ-C	SHZ-C	SHZ-95B
   Power(W)	370	370	370
   Voltage(V/Hz)	220/50	220/50	220/50
   Flow(L/min)	80	80	80
   Body Material	1cr18	polypropylene	Anti-corrosive
   Lift(m)	12	12	12
   Max. Vacuum(Mpa)	0.098	0.098	0.098
   Sucking rate for single tap (L/min)	10	10	10
   Quantity of tap(Pcs)	5	3	5
   Tank capacity(L)	50	50	50
   Dimension(mm)	450*340*870	450*340*870	450*340*840
   Weight(kg)	37	37	37
   Security performance	check-valve	check-valve	check-valve

   
   The form can be filled in the actual website url.

SHZ-D (Ⅲ) circulating water vacuum pump最先出现在ZZKD INSTRUMENT。

The RE-5299 desktop rotary evaporator has a rotating bottle capability of 0.25 to 2 L and a temperature difference of 1°C. They have the advantage of offering cautious thermal therapy of temperature-sensitive mediums.

Advantages of rotary evaporator:

1. The rotating flask is straightforward to install and set up.
2. Intelligent PID temp. Controller, it can be lifted up and down.
3. Continuous feed is out there.
4. The glass part consists of corrosion-resistant, high-temperature resistant borosilicate glass.
5. The sealing half adopts the flange sealing precept to take care of a high vacuum.
6. This sort of rotary evaporator uses high-quality excessive borosilicate glass, is heat-resistant and shock-resistant, not easy to break, and the mechanical parts and water bath are made of 304 stainless steel and aluminum alloy.
7. 1°c-100°c temperature adjustment, 0-120 (r/m) velocity adjustment, to meet numerous needs of laboratory devices.
   

Grouped equipment：

RE-5299: DLSB-5/10 low-temperature coolant circulating pump and SHZ-D (Ⅲ) circulating water vacuum pump

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What are the characteristics of the rotary evaporator in contrast with different evaporators?
   All rotary evaporators have a built-in raise motor that routinely lifts the flask above the heating pot when energy is lost. The materials is rotated under vacuum conditions, and a liquid film is formed within the evaporating flask, which has a large heating space. The rotation successfully suppresses the boiling of the fabric. Due to its features and convenience, rotary evaporators can be utilized for speedy distillation extraction, even for inexperienced operators.
2. Rotary evaporator supporting tools heating water tub:
   The basic heating medium for heating the water bathtub is water. If there is a special requirement for temperature, it can be changed with silicone oil or high-temperature silicone oil. Closing the lid in time can stop mud from coming into the water or oil bath and hold the water or oil tub clean.
3. Condenser for rotary evaporator:
   Condenser: The general cooling medium is water. If the ambient temperature is high and the condensation impact isn’t good, it might be changed with ethanol, and a circulating freezer could be put in. The cooled ethanol is pressed into the condenser for cooling treatment. In chilly weather, when it isn’t in use, the water in the condenser ought to be drained overnight to forestall the water from solidifying, quantity expansion, and cracking of the condenser.
   

   MODEL	RE-5299
   Evaporating Flask (L)	1/24#(0.25-2L)
   Receiving Flask (L)	0.25-1L/24#
   Rotating Motor (W)	30
   Water (Oil) Bath Power (W)	1500
   Rotating Speed (R/min)	Digital Display 0-120
   Lifting Mode	Water/Oil bath manual lifting
   Lifting Height (mm)	0-150
   Max. Vacuum Degree (MPa)	0.098
   Condenser	Vertical with charge pipe, large condenser, evaporating pipe
   Bath Temp Control Range (℃)	Intelligent digital/TR-399
   Water Bath Size (mm)	Φ240*150
   Evaporation Rate (L/H, H2O)	≥1
   Voltage (V/Hz)	220V 50/60
   Note	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-5299 Rotary Evaporator最先出现在ZZKD INSTRUMENT。

The evaporation capability of the RE-5002 rotary evaporator is bigger than that of a standard, static distillation equipment. Heat transmission within the heating bathtub as properly as contained in the flask is greatly improved by the rotation of the evaporating flask. Rotation significantly enlarges the lively floor inside the flask hastening the evaporation. With the liquid remaining at any one level of the flask wall for a quick while only.is topic to reduce stress through the distillation (no overheating, no incrustation). Bumping and foaming are significantly lowered by rotation.

Advantages of rotary evaporator:

1. CE, ISO licensed product patent certificate
2. Manual lifting, excessive stability, knob button adjustment, digital display, handy operation.
3. The main and auxiliary double condenser design, the fabric restoration fee is high, the recovery rate can attain 95%.
4. The bracket is made from 304 stainless-steel, which is powerful and durable. The rotating bottle, receiving bottle and condenser are made of high-quality borosilicate glass, which isn’t straightforward to interrupt.
5. The rotating major engine starts stably, the speed is 0-120 (r/m), the motor and circuit adopt imported products, and may be upgraded to explosion-proof, safer and longer service life.
6. The sealing part adopts the precept of flange sealing, which can keep excessive vacuum.
   

Grouped equipment：

RE-5002 rotary evaporator: DLSB-30/30Low temperature coolant circulation pump and SHZ-C circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What is the power supply of the rotary evaporator?
   Our rotary evaporator energy provide is mostly 220V50HZ and 110V60HZ.
2. How long can the rotary evaporator continue to work?
   The rotary evaporator can work all the time, however we suggest that or not it’s shut down for upkeep after running for a period of time. More frequent upkeep can enhance the service life of the tools.
3. What is the fabric recovery price of the rotary evaporator?
   The materials restoration price of the rotary evaporator produced by our company may be very excessive, and the recovery rate is mostly between 95-99%.
4. What is the distinction between the explosion-proof type rotary evaporator and the ordinary type?
   The explosion-proof rotary evaporator adopts an alternator, stepless velocity regulation (variable frequency speed regulation), brushless and no spark. The manual control swap adopts two-way control, the current is lower than 3mA, and the explosion-proof perform is sweet.
   

   Model	RE-1002	RE-2002	RE-5002
   Evaporating Flask（L）	10	20	50
   Receiving Flask（L）	5	10	20
   Rotating Motor(W)	180W	180W	180W
   Rotating Speed(R/MIN)	0-120	0-120	0-90
   Water(Oil) Bath Power(W)	3000	4500	7000
   Temperature Control Range	RT-399℃	RT-399℃	RT-399℃
   Temperature Fluctuation(℃)	±1℃	±1℃	±1℃
   Evaporation Rate(H2O)	>3L/h	≥5L/h	≥9L/h
   Condenser	Vertical Double Condenser	Vertical Double Condenser	Vertical Double Condenser
   Lifting Mode	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting
   Lifing Height(mm)	0~220	0~220	0~220
   Voltage	220V50HZ	220V50HZ	380V50HZ
   Sealing Mode	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing
   Note	Customized configuration is available	Customized configuration is available	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-5002 Rotary Evaporator最先出现在ZZKD INSTRUMENT。

The evaporation capability of the RE-2002 rotary evaporator is larger than that of conventional, static distillation equipment. Heat transmission within the heating tub in addition to contained in the flask is greatly improved by the rotation of the evaporating flask. Rotation greatly enlarges the active floor contained in the flask hastening the evaporation. With the liquid remaining at anybody point of the flask wall for a brief time solely.is topic to reduce stress during the distillation (no overheating, no incrustation). Bumping and foaming are greatly lowered by rotation.

Advantages of rotary evaporator:

1. CE, ISO certified product patent certificate
2. Manual lifting, high stability, knob button adjustment, digital show, handy operation.
3. The main and auxiliary double condenser design, the material recovery price is high, the restoration fee can attain 95%.
4. The bracket is manufactured from 304 stainless steel, which is strong and sturdy. The rotating bottle, receiving the bottle, and condenser are made from high-quality borosilicate glass, which is not straightforward to interrupt.
5. The rotating main engine begins stably, the velocity is 0-120 (r/m), the motor and circuit adopt imported products, and can be upgraded to explosion-proof, safer, and longer service life.
6. The sealing half adopts the principle of flange sealing, which may keep an excessive vacuum.
   

Grouped equipment：

RE-2002 rotary evaporator: DLSB-30/30Low temperature coolant circulation pump and SHZ-C circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance, and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What is the power supply of the rotary evaporator?
   Our rotary evaporator energy provide is mostly 220V50HZ and 110V60HZ.
2. How long can the rotary evaporator continue to work?
   The rotary evaporator can work all the time, however we suggest that or not it’s shut down for upkeep after running for a period of time. More frequent upkeep can enhance the service life of the tools.
3. What is the fabric recovery price of the rotary evaporator?
   The materials restoration price of the rotary evaporator produced by our company may be very excessive, and the recovery rate is mostly between 95-99%.
4. What is the distinction between the explosion-proof type rotary evaporator and the ordinary type?
   The explosion-proof rotary evaporator adopts an alternator, stepless velocity regulation (variable frequency speed regulation), brushless and no spark. The manual control swap adopts two-way control, the current is lower than 3mA, and the explosion-proof perform is sweet.
   

   Model	RE-1002	RE-2002	RE-5002
   Evaporating Flask（L）	10	20	50
   Receiving Flask（L）	5	10	20
   Rotating Motor(W)	180W	180W	180W
   Rotating Speed(R/MIN)	0-120	0-120	0-90
   Water(Oil) Bath Power(W)	3000	4500	7000
   Temperature Control Range	RT-399℃	RT-399℃	RT-399℃
   Temperature Fluctuation(℃)	±1℃	±1℃	±1℃
   Evaporation Rate(H2O)	>3L/h	≥5L/h	≥9L/h
   Condenser	Vertical Double Condenser	Vertical Double Condenser	Vertical Double Condenser
   Lifting Mode	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting
   Lifing Height(mm)	0~220	0~220	0~220
   Voltage	220V50HZ	220V50HZ	380V50HZ
   Sealing Mode	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing
   Note	Customized configuration is available	Customized configuration is available	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-2002 Rotary Evaporator最先出现在ZZKD INSTRUMENT。

RE-2000E rotary evaporator is a rotary evaporator independently developed by our company. using double-line large-capacity blue backlight Liquid crystal display is used as the interface, and the control half uses a high-performance single-chip microcomputer as the main management chip. It is affordable, straightforward to function, stable in high quality, economical, and practical. It is used for separation, crystallization, drying, purification, recycling, and different operations in the fields of biopharmaceuticals, medicine, chemistry, and chemical engineering. Important gear.

Advantages of rotary evaporator:

1. Electric lifting, knob button adjustment, digital show, convenient operation.
2. The motor adopts worldwide copper wire, which has a long continuous operation time and good stability.
3. three. The sealing half adopts the precept of flange sealing, which can maintain the excessive vacuum.
4. Fully enclosed heating design.
5. This kind of rotary evaporator makes use of high-quality borosilicate glass, which is heat-resistant and shock-resistant and is not straightforward to interrupt.
6. 1°c-100°c temperature adjustment, speed 0-120 (r/m), assembly various wants of laboratory instruments.
7. Automatic temperature control digital show, the temperature is controlled by pt100 and digital display sensor. When the preselected temperature reaches the temperature you set, the controller mechanically turns off the heater power, and when it is decreased than the preselected temperature, the controller automatically activates to achieve constant temperature.
   

Grouped equipment：

RE-2000E mini rotovap: DLSB-5/10 Low-temperature coolant circulation pump and SHZ-D  circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What are the precautions when utilizing a rotary evaporator?
   When the set temperature of the low-temperature cooling circulation pump is decreased to zero levels, the cooling medium cannot be watered. Contact our technicians to switch the appropriate medium (such as ethylene glycol), and inject 1/2 volume of the medium into the heating pot to make sure immersion. half of the evaporating flask
2. How to choose a cryopump for a rotary evaporator?
   We recommend choosing a low-temperature coolant circulation pump, which has some nice benefits of energy-saving, water-saving, anti-fouling, and anti-scaling. According to your needs, we will present various types of circulating water vacuum pumps.
3. How to decide on the vacuum pump of the rotary evaporator?
   We recommend selecting a circulating water vacuum pump, which has the benefits of corrosion resistance, no air pollution, and quick vacuuming. According to your needs, we are able to present varied types of circulating water vacuum pumps.
   

   MODEL	RE-2000A	RE-2000B	RE-2000E
   Evaporating Flask (L)	2L 29#Conical ground joint	2L 29#Conical ground joint	2L 29#Conical ground joint
   Receiving Flask (L)	1L Ball grinding mouth	1L Ball grinding mouth	1L Ball grinding mouth
   Rotating Motor (W)	40	40	40
   Rotating Speed (R/min)	No Polar 0-120	Digital Display 0-120	LCD 0-120
   Lifting Mode	Motor automatic lifting	Motor automatic lifting	Motor automatic lifting
   Lifting Height (mm)	0-140	0-140	0-140
   Water (Oil) Bath Power (kw)	1.5	1.5	1.5
   Condenser	The double backflow integration standard condenser	The double backflow integration standard condenser	The double backflow integration standard condenser
   Bath Temp Control Range (℃)	RT-99 Temperature control accuracy ±1℃	RT-99 Temperature control accuracy ±1℃	RT-99 Temperature control accuracy ±1℃
   Water Bath Size(mm)	Φ230*130	Φ230*130	Φ230*130
   Evaporation Rate (L/H, H2O)	≥1	≥1	≥1
   Exermal Size (mm)	550*420*780	550*420*780	550*420*780
   Voltage (V/Hz)	220V 50/60	220V 50/60	220V 50/60
   Note	Customized configuration is available	Customized configuration is available	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-2000E Rotary Evaporator最先出现在ZZKD INSTRUMENT。

RE-2000B makes use of a two-line high-capacity blue backlit LCD because the interface, and the control half adopts high-performance MCU because the grasp chip. The operation is easy, the standard is stable, economical, and sensible, and it’s a piece of important tools for separation, crystallization, drying, purification, recycling, and other operations within the fields of biopharmaceuticals, medication, chemistry, and chemical engineering.

Advantages of rotary evaporator:

1. Quick and straightforward lifting mechanism.
2. The evaporators can incline willfully along the horizontal course within 0-45°C.
3. High evaporation fee vertical condensation system.
4. Rotating flask and Collection flask.
5. The flasks are made from GG-17 excessive borosilicate glass which is blown by hand. Their depth, concentricity, glossiness, and floor finish are better than rough flasks.
6. The sealing half adopts the precept of flange sealing, which may preserve a excessive vacuum.
7. Fully enclosed heating design.
8. 1°C-100°C temperature adjustment, speed 0-120 (r/m), meeting varied needs of laboratory devices.
   

Grouped equipment：

RE-2000B mini rotovap： DLSB-5/10 Low-temperature coolant circulation pump and SHZ-D circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What are the precautions when utilizing a rotary evaporator?
   When the set temperature of the low-temperature cooling circulation pump is decreased to zero levels, the cooling medium cannot be watered. Contact our technicians to switch the appropriate medium (such as ethylene glycol), and inject 1/2 volume of the medium into the heating pot to make sure immersion. half of the evaporating flask
2. How to choose a cryopump for a rotary evaporator?
   We recommend choosing a low-temperature coolant circulation pump, which has some nice benefits of energy-saving, water-saving, anti-fouling, and anti-scaling. According to your needs, we will present various types of circulating water vacuum pumps.
3. How to decide on the vacuum pump of the rotary evaporator?
   We recommend selecting a circulating water vacuum pump, which has the benefits of corrosion resistance, no air pollution, and quick vacuuming. According to your needs, we are able to present varied types of circulating water vacuum pumps.
   

   MODEL	RE-2000A	RE-2000B	RE-2000E
   Evaporating Flask (L)	2L 29#Conical ground joint	2L 29#Conical ground joint	2L 29#Conical ground joint
   Receiving Flask (L)	1L Ball grinding mouth	1L Ball grinding mouth	1L Ball grinding mouth
   Rotating Motor (W)	40	40	40
   Rotating Speed (R/min)	No Polar 0-120	Digital Display 0-120	LCD 0-120
   Lifting Mode	Motor automatic lifting	Motor automatic lifting	Motor automatic lifting
   Lifting Height (mm)	0-140	0-140	0-140
   Water (Oil) Bath Power (kw)	1.5	1.5	1.5
   Condenser	The double backflow integration standard condenser	The double backflow integration standard condenser	The double backflow integration standard condenser
   Bath Temp Control Range (℃)	RT-99 Temperature control accuracy ±1℃	RT-99 Temperature control accuracy ±1℃	RT-99 Temperature control accuracy ±1℃
   Water Bath Size(mm)	Φ230*130	Φ230*130	Φ230*130
   Evaporation Rate (L/H, H2O)	≥1	≥1	≥1
   Exermal Size (mm)	550*420*780	550*420*780	550*420*780
   Voltage (V/Hz)	220V 50/60	220V 50/60	220V 50/60
   Note	Customized configuration is available	Customized configuration is available	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-2000B Rotary Evaporator最先出现在ZZKD INSTRUMENT。

The capacity of the RE-1002 rotary evaporator is 10L, it has a PID clever controller for precise temperature control. With a dual condenser, the restoration fee can reach 95%. Explosion-proof models are available and can be custom-made for other necessities.

Advantages of rotary evaporator:

1. International superior EL gas-tight system retains high vacuum degree. Gas-liquid separator, no reflux.
2. Double condenser, collection price over 95%.
3. The rotating flask is straightforward to install and set up.
4. Continuous feed is out there. (Inlet Valve).
5. Water bath, clever PID temp. a controller can be lifted up and down.
6. Reasonable construction, exquisite materials.
7. Mechanical parts are made of chrome steel and aluminum die casting.
8. Glass elements are made of corrosion resistance, high-temperature resistance, borosilicate glass.
9. Rubber parts adopt new normal supplies, simple to vary for customers.
10. Built-in transmission system, frequency conversion velocity regulation, steady and reliable velocity.
    

Grouped equipment：

RE-1002: DLSB-20/30 low-temperature coolant circulating pump and SHZ-C circulating water vacuum pump

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What reaction is the rotary evaporator generally used for?
   Solid-liquid separation, sturdy acid or weak base reaction. Can not carry out sturdy alkali response, liquid-liquid separation, no azeotrope.
2. How to add materials when the rotary evaporator is used?
   The materials contained within the rotary evaporator is generally one-half of the rotating bottle, or a little greater than one-half.
3. What are the steps for utilizing the rotary evaporator?
   After adjusting the place of the rotary evaporator and the tub, turn on the vacuum. The materials could be sucked into the rotating bottle with a hose on the feeding port. Turn on the low temperature coolant circulation pump. The water bath must be powered on after including the medium. Turn on the management change, regulate the knob to the optimal velocity to get well the solvent. Turn off the vacuum pump, activate the switch to launch the fuel, and take out the dissolved coal in the assortment bottle.
   

   Model	RE-1002	RE-2002	RE-5002
   Evaporating Flask（L）	10	20	50
   Receiving Flask（L）	5	10	20
   Rotating Motor(W)	180W	180W	180W
   Rotating Speed(R/MIN)	0-120	0-120	0-90
   Water(Oil) Bath Power(W)	3000	4500	7000
   Temperature Control Range	RT-399℃	RT-399℃	RT-399℃
   Temperature Fluctuation(℃)	±1℃	±1℃	±1℃
   Evaporation Rate(H2O)	>3L/h	≥5L/h	≥9L/h
   Condenser	Vertical Double Condenser	Vertical Double Condenser	Vertical Double Condenser
   Lifting Mode	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting	Water(Oil) Bath Mannal Lifting
   Lifing Height(mm)	0~220	0~220	0~220
   Voltage	220V50HZ	220V50HZ	380V50HZ
   Sealing Mode	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing	PTFE,Fluoro Rubber Sealing
   Note	Customized configuration is available	Customized configuration is available	Customized configuration is available

   
   The form can be filled in the actual website url.

RE-1002 Rotary Evaporator最先出现在ZZKD INSTRUMENT。

The RE-501 compact rotary evaporator is designed to be used within the laboratory. There is a large bathtub for a 5L flask. Continuous reflow is carried out using a 3L receiving bottle, a return valve, and a backside drain valve for the receiving bottle. Manual lifting is possible. The heating temperature ranges from ambient to 399 °C.

Advantages of rotary evaporator:

1. Quick and straightforward lifting mechanism.
2. The evaporator may be tilted horizontally within the vary of 0-45°.
3. High evaporation price of the vertical condensation system.
4. Heating Tank: Stainless metal heating tube provides a heat source. The temperature range will be RT~99 °C with water. The water tank is cylindrical and manufactured from high-quality chrome steel. So it’s corrosion-resistant and sturdy. The tanks can be found for 2-20liter rotating flask heated. Moreover, the tank can be moved in accordance with the rotating flask size.
5. Vacuum Sealing: PTFE evaporating pipe, good sealing, and heat-resisting.The joint part is a sealed Fluorine rubber mat which brings good efficiency.
6. Automatic temperature management digital show.
7. Rotating flask and Collection flask.
8. The flasks are made from GC-17 excessive borosilicate glass which is blown by hand. Their intensity, concentricity, glossiness, and floor end are higher than tough flasks.
   

Grouped equipment：

RE-501 rotary evaporator: DLSB-10/10Low temperature coolant circulation pump and SHZ-D  circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What reaction is the rotary evaporator generally used for?
   Solid-liquid separation, sturdy acid, or weak base reaction. Can not carry out sturdy alkali response, liquid-liquid separation, no azeotrope.
2. How to add materials when the rotary evaporator is used?
   The materials contained within the rotary evaporator are generally one-half of the rotating bottle, or a little greater than one-half.
3. What are the steps for utilizing the rotary evaporator?
   After adjusting the place of the rotary evaporator and the tub, turn on the vacuum. The materials could be sucked into the rotating bottle with a hose on the feeding port. Turn on the low-temperature coolant circulation pump. The water bath must be powered on after including the medium. Turn on the management change, regulate the knob to the optimal velocity to get well the solvent. Turn off the vacuum pump, activate the switch to launch the fuel, and take out the dissolved coal in the assortment bottle.
   

   Model	RE-201D	RE-301	RE-501
   Evaporating Flask（L）	2	3	5
   Receiving Flask（L）	1	2	3
   Rotating Motor(W)	40(Stepless speed regulation)	40(Stepless speed regulation)	40(Stepless speed regulation)
   Rotating Speed(R/min)	0-120	0-120	0-120
   Water（Oil）Bath Power(W)	1200	1500	1500
   Temp Control Mode/Range	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃
   Temp Resolution	±2℃	±2℃	±2℃
   Evaporation Rate(L/H2O)	≥1	≥1.5	≥1.5
   Max. Vacuum Degree	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)
   Lifting Height（mm)	0-150	0-120	0-120
   Water Bath Size	Φ24*15	Φ26*15	Φ28*17
   Condenser	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe
   Lifting Mode	Oil bath Manual Lifting	Oil bath Manual Lifting	Oil bath Manual Lifting
   Voltage	220V/ 50 HZ	220V/ 50 HZ	220V/ 50 HZ
   Sealing Mode	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing

   
   The form can be filled in the actual website url.

RE-501 rotary evaporator最先出现在ZZKD INSTRUMENT。

RE-301 rotary evaporator is a sort of mini rotary evaporator, Rotary evaporators are distillation items that incorporate an environment friendly condenser with a rotary flask system. As the flask containing the solvent is rotated it frequently transfers a thin layer of liquid over the whole inside surface. This gives a really giant surface area for evaporation that is affected by heating from the accent water or oil bath. lt is certainly one of the essential primary instruments within the chemical trade, pharmaceutical business, universities and analysis laboratories, and different items, etc.

Advantages of rotary evaporator:

1. Advanced EL gas-tight system keeps excessive vacuum degree.
2. The rotating flask is straightforward to install and set up.
3. Continuous feeds are available. (Inlet Valve)
4. Water(oil) bath, clever PID temp. a controller may be lifted up and down.
5. Reasonable construction, exquisite materials.
6. Mechanical parts are made of stainless-steel and aluminum die casting.
7. Adopt corrosion and high-temperature resistance borosilicate glass.
   

Grouped equipment：

RE-301 rotary evaporator: DLSB-5/10Low temperature coolant circulation pump and SHZ-D circulating water vacuum pump.

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What is the optimum ambient temperature for the rotary evaporator?
   The optimum ambient temperature is 5℃～35℃.
2. How to decide on the supporting gear of the rotary evaporator?
   We suggest to determine on low temperature coolant circulating pump, circulating water vacuum pump, you may also contact us, we are going to make suggestions according to your wants.
3. Why does the rotary evaporator select high borosilicate glass for the glass part?
   Our company’s rotary evaporators are all manufactured from high borosilicate glass, which is immune to acid and alkali, excessive temperature, high transparency, wear resistance, smooth floor and simple cleaning.
   

   Model	RE-201D	RE-301	RE-501
   Evaporating Flask（L）	2	3	5
   Receiving Flask（L）	1	2	3
   Rotating Motor(W)	40(Stepless speed regulation)	40(Stepless speed regulation)	40(Stepless speed regulation)
   Rotating Speed(R/min)	0-120	0-120	0-120
   Water（Oil）Bath Power(W)	1200	1500	1500
   Temp Control Mode/Range	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃
   Temp Resolution	±2℃	±2℃	±2℃
   Evaporation Rate(L/H2O)	≥1	≥1.5	≥1.5
   Max. Vacuum Degree	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)
   Lifting Height（mm)	0-150	0-120	0-120
   Water Bath Size	Φ24*15	Φ26*15	Φ28*17
   Condenser	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe
   Lifting Mode	Oil bath Manual Lifting	Oil bath Manual Lifting	Oil bath Manual Lifting
   Voltage	220V/ 50 HZ	220V/ 50 HZ	220V/ 50 HZ
   Sealing Mode	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing

   
   The form can be filled in the actual website url.

RE-301 Rotary Evaporator最先出现在ZZKD INSTRUMENT。

RE-201D rotary evaporator is our company’s direct sales rotary evaporator. It is cheap, straightforward to operate, secure in high quality, economical, and sensible. It is a mannequin of a mini rotary evaporator, mainly utilized in laboratories, schools, and so on.

Advantages of rotary evaporator:

1. Built-in transmission system, frequency conversion speed regulation, stable velocity.
2. Beautiful look, small and light-weight, top-rotating seal, utilizing PTFE and fluorine rubber compound sealing construction, good sealing performance, firmness, robust corrosion-resistance, and good vacuum.
3. 1°c-100°c temperature adjustment, 0-120 (r/m) velocity adjustment, to meet varied wants of laboratory devices.
4. This sort of rotary evaporator makes use of high-quality excessive borosilicate glass, heat-resistant and shock-resistant, and isn’t easy to break.
5. The motor and circuit undertake imported merchandise, and may be upgraded to explosion-proof, safer, and longer service life.
6. Explosion-proof system is optional.
   

Grouped equipment：

RE-201D: DLSB-5/10 low-temperature coolant circulating pump and SHZ-D (Ⅲ) circulating water vacuum pump

After-sales service:

1. Provide targeted installation videos;
2. Under the premise of correct installation, regular maintenance and use, we guarantee a one-year warranty;
3. After the expiration of the warranty period, the products sold by our company enjoy lifetime warranty repairs, and we only charge the cost price for replacing the standard parts and seals of the product;
4. The technicians put forward reasonable suggestions based on the use of the product, and assist the customer to choose the appropriate model;
5. Provide 24-hour technical consultation response.

FAQ:

1. What is the optimum ambient temperature for the rotary evaporator?
   The optimum ambient temperature is 5℃～35℃.
2. How to decide on the supporting gear of the rotary evaporator?
   We suggest to determine on low temperature coolant circulating pump, circulating water vacuum pump, you may also contact us, we are going to make suggestions according to your wants.
3. Why does the rotary evaporator select high borosilicate glass for the glass part?
   Our company’s rotary evaporators are all manufactured from high borosilicate glass, which is immune to acid and alkali, excessive temperature, high transparency, wear resistance, smooth floor and simple cleaning.
   

   Model	RE-201D	RE-301	RE-501
   Evaporating Flask（L）	2	3	5
   Receiving Flask（L）	1	2	3
   Rotating Motor(W)	40(Stepless speed regulation)	40(Stepless speed regulation)	40(Stepless speed regulation)
   Rotating Speed(R/min)	0-120	0-120	0-120
   Water（Oil）Bath Power(W)	1200	1500	1500
   Temp Control Mode/Range	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃	Intelligent digital/RT-399℃
   Temp Resolution	±2℃	±2℃	±2℃
   Evaporation Rate(L/H2O)	≥1	≥1.5	≥1.5
   Max. Vacuum Degree	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)	＜133pa(1.33mbar,1Torr,0.098Mpa)
   Lifting Height（mm)	0-150	0-120	0-120
   Water Bath Size	Φ24*15	Φ26*15	Φ28*17
   Condenser	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe	Vertical with charge pipe, large condenser,evaporating pipe
   Lifting Mode	Oil bath Manual Lifting	Oil bath Manual Lifting	Oil bath Manual Lifting
   Voltage	220V/ 50 HZ	220V/ 50 HZ	220V/ 50 HZ
   Sealing Mode	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing	PTFE,fluoro rubber sealing

   
   The form can be filled in the actual website url.

RE-201D Rotary Evaporator最先出现在ZZKD INSTRUMENT。